General Excavation in Eau Claire, WI
Precise excavation for foundations, utilities, grading, and site preparation.
General excavation is where plans are put into the ground. Drawings and elevations only matter once the site is cut, graded, and shaped to match them. Before the first footing is installed, this stage determines whether construction can move forward cleanly or needs adjustment.
Serving West Central Wisconsin, 715 Excavating provides general excavation services in Eau Claire, WI, and surrounding communities for residential and light commercial projects. We prepare sites to match plan elevations and drainage requirements so construction can begin on a properly prepared foundation.
Why Builders and Property Owners Choose 715 Excavating
Plan-Based Excavation First
We review drawings, elevations, drainage requirements, and access conditions before cutting begins so excavation matches the design and helps reduce downstream adjustments.
Controlled Cutting and Shaping
Soil is removed, placed, and shaped to establish accurate building pads, utility corridors, and working surfaces that meet plan elevations and tolerances.
Equipment Matched to Each Site
Excavators, skid steers, and attachments are selected based on depth, soil conditions, space, and access, so excavation stays precise and controlled.
Build-Ready Surfaces Delivered
When excavation is complete, pads, trenches, and working areas are stable, properly graded, and ready for foundations, utilities, grading, or flatwork.
Where Many Projects Start Going Wrong
General excavation sets the physical limits of a project. If elevations are off, foundations won’t align. If slopes are wrong, water collects. If access is poor, every trade slows down.
These problems usually don’t show up until concrete, utilities, or framing begin. At that point, corrections are expensive, schedules slip, and work has to be redone.
Ground Shaped to Match the Plan
General excavation solves these problems before construction begins by establishing accurate grades, stable bases, and controlled drainage.
This work focuses on:
- Cutting and filling to match plan elevations
- Shaping building pads to design dimensions
- Establishing correct slopes for surface drainage
- Preparing working surfaces for foundations and utilities
- Creating stable access for trades and equipment
When this stage is done correctly, foundations, utilities, grading, and flatwork can be installed as planned with fewer adjustments later.
Where Many Projects Start Going Wrong
General excavation sets the physical limits of a project. If elevations are off, foundations won’t align. If slopes are wrong, water collects. If access is poor, every trade slows down.
These problems usually don’t show up until concrete, utilities, or framing begin. At that point, corrections are expensive, schedules slip, and work has to be redone.
Services Included With General Excavation
Basement and crawl space excavation typically includes:
- Full basement excavation
- Partial basement excavation
- Crawl space excavation
- Frost wall excavation
- Building pad shaping and elevation control
- Bearing surface leveling and correction
- Over-excavation and unsuitable soil removal
- Drainage shaping at the foundation grade
- Access preparation for forming and concrete placement
Our General Excavation Process
Site Review and Layout
We review drawings, elevations, soil conditions, drainage paths, and access before excavation begins so cuts and fills match design requirements.
Cut, Fill, and Shaping
Earth is removed or placed to establish building pads, slopes, and working surfaces that align with plans and drainage design.
Final Grading and Access Setup
Pads, transitions, and access routes are shaped and stabilized so foundations, utilities, and grading can proceed without correction.
Service Areas
715 Excavating proudly serves the following communities in Western Wisconsin:
- Eau Claire, WI
- Chippewa Falls, WI
- Menomonie, WI
- New Auburn, WI
- Osseo, WI
- Bloomer, WI
- Cadott, WI
- Stanley, WI
- Thorp, WI
- Withee, WI
- Greenwood, WI
- Fall Creek, WI
- Augusta, WI
- Mondovi, WI
- Eleva, WI
- Colfax, WI
- Cornell, WI
- Elk Mound, WI
- Chetek, WI
- Holcombe, WI
If your project is outside these areas, call to discuss availability.
What Our Customers Are Saying
Ready to Start With the Ground Set Right
General excavation determines how every phase that follows will perform. The right layout, elevations, and drainage prevent delays, protect budgets, and reduce long-term problems.
If you’re planning a new build, addition, or site correction, we’re ready to review your plans and prepare the ground correctly from the start.
Contact 715 Excavating to schedule your site evaluation.
Frequently Asked Questions
What types of projects use general excavation?
General excavation is used for homes, garages, additions, light commercial buildings, utility corridors, drainage corrections, and access preparation before foundations or flatwork are installed.
Do you work from construction plans and surveys?
Yes. We follow drawings, elevations, and layout information so pads, slopes, and transitions match design requirements.
Can you correct elevation or drainage problems?
Yes. General excavation often includes reshaping grades and correcting elevations to improve drainage and site performance. If drainage improvements are needed, we’ll walk the site with you, explain your options, and help determine whether additional grading or drainage work would be the right next step.
How long does general excavation usually take?
Timing depends on site size, soil conditions, access, and scope of work. Small residential projects may take one to two days, while larger or more complex sites can require additional time for shaping, compaction, and drainage control.
Do you provide general excavation services in Eau Claire, WI, and nearby areas?
Yes. We provide general excavation services in Eau Claire, WI, along with site preparation across Chippewa Falls, Menomonie, Fall Creek, Bloomer, and surrounding communities.