Inground Pool Removal in Western Wisconsin
A damaged, outdated, or unused backyard pool can take up a large part of the property, and inground pool removal can give you more room for lawn, landscaping, a future building, or another outdoor project. Cracked concrete, torn liners, standing water, failed equipment, and ongoing upkeep can make an older pool more trouble than it is worth in Western Wisconsin.
715 Excavating handles pool demolition, debris hauling, backfilling, compaction, and grading based on the pool type, equipment access, local requirements, and how you want to use the area afterward.
Complete vs. Partial Pool Removal
There are two common approaches to swimming pool removal. The right one depends on local requirements, budget, site conditions, and what you want to do with the area later.
|
Removal option |
What it generally involves |
Common considerations |
|
Complete removal |
The pool shell and approved surrounding materials are broken up, removed, and hauled away |
More demolition and hauling, but fewer buried pool materials remain |
|
Partial removal |
Portions of the pool are removed or opened for drainage, with approved material sometimes remaining below grade |
Local rules, drainage, future building plans, and disclosure may affect whether this option is appropriate |
With complete removal, the concrete, liner, fiberglass, steel, or other approved pool materials are taken out of the excavation. The opening is then filled and compacted in lifts before the surface is graded.
Partial removal may involve removing the upper sections, opening the bottom for drainage, and filling the remaining space according to the approved scope.
Pool Access, Permits, and Drainage
Pool sites are often located behind homes, fences, landscaping, patios, or retaining walls. The available route affects the equipment that can reach the work area and how debris and fill can be moved.
We review:
- Gate and access width
- Slopes and soft ground
- Septic systems or private lines
- Overhead wires
- Nearby foundations
- Retaining walls
- Space for trucks and fill delivery
- Areas that need protection during access
When digging is part of the project, 715 Excavating calls 811 so public underground utilities can be marked.
Inground Pool Removal Cost Factors
The cost of inground pool removal depends on the pool and the property around it.
Common pricing factors include:
- Complete or partial removal
- Pool dimensions and depth
- Shell and liner materials
- Amount of surrounding concrete
- Equipment access
- Debris hauling volume
- Fill quantity
- Compaction needs
- Drainage conditions
- Final grading and surface finish
Photos and pool dimensions are helpful, but an on-site review may be needed when access, drainage, or construction details are unclear.
Concrete, Liners, and Pool Equipment
Different pool materials require different handling. Concrete shells may need to be broken into manageable sections, while vinyl liners, fiberglass components, metal walls, and plumbing are removed or handled according to the agreed scope.
The project may also involve:
- Concrete pool decks
- Coping
- Steps
- Diving board bases
- Pump and filter pads
- Heaters
- Plumbing lines
- Fencing or small attached features
Let us know what you want removed and what should remain. Pool furniture, chemicals, propane tanks, loose equipment, and personal items should normally be cleared before the work begins.
For broader property changes, the pool work may be coordinated with structure removal and site clearing.
Backfilling and Compaction
Backfilling replaces the open pool area with approved material. Fill is typically added in layers rather than dumped all at once.
Depending on the project, the work may include:
- Placing approved fill in lifts
- Compacting each layer
- Managing drainage through the filled area
- Adding topsoil or gravel near the surface
- Allowing for the intended finished elevation
Proper placement helps reduce large voids and excessive settling, though some normal settlement may still occur over time.
Backfilling and Compaction
Backfilling replaces the open pool area with approved material. Fill is typically added in layers rather than dumped all at once.
Depending on the project, the work may include:
- Placing approved fill in lifts
- Compacting each layer
- Managing drainage through the filled area
- Adding topsoil or gravel near the surface
- Allowing for the intended finished elevation
Proper placement helps reduce large voids and excessive settling, though some normal settlement may still occur over time.
Final Grading and Future Site Use
After backfilling, the surface is graded around the intended use of the area.
The finished space may become:
- Lawn
- Landscaping
- Garden space
- Open yard
- Parking or access
- A future patio area
- Part of a larger construction site
A future building area may need additional site preparation. Tell us about those plans early so the pool removal scope does not conflict with what comes afterward.
Getting the Pool Removed
Starting the project takes three simple actions.
Tell us about the pool
Share photos, approximate dimensions, the pool type, access details, and what you want the space used for.
Review and approve the estimate
We explain the removal method, hauling, fill, compaction, grading, and other included work.
Use the reclaimed space
Once the approved demolition and finish work are complete, the area is ready for the next phase of your property project.
Reviews From Local Property Projects
Pool removal can affect access routes, landscaping, drainage, and a large section of the yard. Reviews from other projects can help show how 715 Excavating approaches communication, scheduling, cleanup, and working around occupied properties.
Service Areas
715 Excavating proudly serves the following communities in Western Wisconsin:
- Eau Claire, WI
- Chippewa Falls, WI
- Menomonie, WI
- New Auburn, WI
- Osseo, WI
- Bloomer, WI
- Cadott, WI
- Stanley, WI
- Thorp, WI
- Withee, WI
- Greenwood, WI
- Fall Creek, WI
- Augusta, WI
- Mondovi, WI
- Eleva, WI
- Colfax, WI
- Cornell, WI
- Elk Mound, WI
- Chetek, WI
- Holcombe, WI
If your project is outside these areas, call to discuss availability.
Make Better Use of Your Property in Western Wisconsin
An unused pool does not have to keep taking up the yard or creating another maintenance project. Whether you are looking for complete removal or want to discuss a partial option, 715 Excavating can review the pool, access, drainage, fill needs, and future use of the property in Western Wisconsin.
Send photos of the pool, surrounding area, access route, and equipment pad, along with the approximate dimensions. We can use those details to discuss the project and prepare a free estimate for the approved work.
Frequently Asked Questions
Is complete pool removal better than partial removal?
It depends on local requirements and how you plan to use the property. Complete removal takes out the approved pool shell and related materials, while partial removal leaves some material below grade. Complete removal may be the better fit when future construction is being considered, but additional engineering or soil requirements may still apply.
Do I need a permit to remove an inground pool?
A permit or local approval may be required depending on the municipality and the type of removal. Rules can address drainage, fill material, inspections, setbacks, and whether partial removal is allowed. The applicable requirements should be confirmed before demolition begins.
What should be removed before the pool contractors arrive?
Before the work begins, you may need to remove:
- Pool furniture and toys
- Chemicals and cleaning supplies
- Loose pumps or accessories
- Personal items around the access route
- Landscaping features you want to keep
We can discuss fencing, equipment, concrete, and other fixed features when putting together the scope.
Will the filled pool area settle?
Good backfilling and compaction help reduce settlement, but soil can still move over time. The amount may depend on fill material, moisture, compaction, drainage, and the depth of the former pool. Additional topsoil or minor grading may eventually be needed, especially when the area is finished as lawn.
What details should I share when contacting pool removal contractors?
Include the pool type, approximate length and width, estimated depth, access width, amount of surrounding concrete, and what you want to do with the area afterward. You can also call 715 Excavating when the layout, drainage, or future plans are easier to explain in a conversation.